Frequently asked questions

Find answers to the most common questions about our ceramic products, from their features and applications to installation, grouting and maintenance. Explore our recommendations to learn more about each product and its possible uses.

Popular searches:

12 questions

For the shower floor, choose a model specified for floor use and with suitable slip resistance for that purpose. Porcelain stoneware has low water absorption, which makes it suitable for wet areas. You can check floor suitability and slip resistance on the model’s page on the Realonda website.

Topic: Choosing tiles and their uses

Realonda mainly manufactures porcelain stoneware. Its low water absorption and mechanical strength make it suitable for outdoor and wet areas; models intended for outdoor use are also frost-resistant. For a terrace or the area around a pool, choose a floor tile intended for that use and check its slip resistance on the model’s page. Products identified as Hi-Thick are thicker and offer greater mechanical strength, especially against breakage and bending.

Topic: Choosing tiles and their uses

The Pool Solutions catalogue brings together models designed for lining the inside of the pool and for its surroundings. For the inside of the pool basin, choose a product specifically intended for that use. The waterproofing, adhesive and grout must also be suitable for a swimming pool.

Topic: Choosing tiles and their uses

The width depends on the model, its format and the intended layout. As a general guideline, Realonda advises against joints narrower than 1.5 mm and against laying tiles without a joint. Some collections, such as Cuzco, are laid with wider gaps of about 2 cm depending on the composition. This width determines which grouting material should be chosen.

Topic: Joints and grouting

It depends on the design of the tile. If it has a painted joint, you can choose a colour similar to that line for the surrounding joint to give the whole surface continuity. The approximate colour is indicated on the general catalogue page for these products. In models with inner spaces that are grouted, such as Circle, Atrium, Icon, Bali or Chess, the grout colour is part of the design and can be chosen according to the desired effect. In other special-shape collections, such as Cuzco, Nazca or Anta, the joint colour also affects the result. It is a good idea to test it with several tiles before deciding.

Topic: Joints and grouting

Take into account the joint width and the conditions of use. For standard joints, Realonda generally recommends a CG2 cementitious grout; where special performance is required, such as greater mechanical or chemical resistance, it considers reaction resin materials. Some models with inner grouting accept cementitious or epoxy materials suitable for their joints. For wide joints such as those of Cuzco, about 2 cm, a cementitious grout or mortar with coarse silica sand is recommended and epoxy is not advised. Check that the chosen product accepts the planned width and is suitable for the installation location.

Topic: Joints and grouting

How to grout the Circle Collection?

The substrate must be properly prepared and the adhesive must be suitable for the type of tile and the installation location. Porcelain stoneware is usually laid using the thin-bed method with C2 cementitious adhesive; double buttering is used outdoors and for large formats. Special-shape collections require the layout to be planned before fixing the tiles. For Cuzco and Nazca, Realonda specifies double buttering and grouting with cementitious mortar. In all cases, the adhesive’s setting time must be respected before grouting.

Topic: Installation

Installation Cuzco Series

For a bonded installation, the adhesive needs a firm, stable, flat, dry and clean substrate; it must not be applied directly on sand or loose gravel. For porcelain stoneware, Realonda’s general guide recommends thin-bed installation, normally with C2 cementitious adhesive, and double buttering outdoors and for formats larger than 35 × 35 cm or an equivalent area. Any movement joints specified in the project must be respected.

Topic: Installation

Remove the substance as soon as possible with water and a soft cloth; if necessary, use a neutral detergent suitable for the surface. If the stain has dried or persists, check the model’s instructions before using a more specific cleaner. How easy a tile is to clean depends on the finish and the technical characteristics of each piece.

Topic: Cleaning and maintenance

For routine cleaning, water and a neutral detergent with a soft cloth or mop are usually enough. Slip-resistant or textured surfaces may need a soft brush to remove dirt from the texture. Glazed porcelain stoneware normally does not need sealants, varnishes or special treatments; only in specific cases may a tile need to be treated. For post-installation residues, use a product compatible with the finish and with grout that has already set. Do not use cleaners containing hydrochloric or hydrofluoric acid, or corrosive products, on decorated, metallic, pearlescent or lustre-effect tiles.

Topic: Cleaning and maintenance

Measure the area you are going to tile, add extra material for cuts and possible contingencies, and divide the result by the number of square metres in each box. Irregular spaces or special-shaped tiles may require a larger margin. Round up to the next whole box and consider keeping some spare tiles.

Topic: Calculations and technical information

On each model’s page on the Realonda website and in our general catalogue, you can check its characteristics, including slip-resistance information. If you need the technical data sheet or advice for a specific use, request them through the contact form. Tell us the model and where you want to install it so that Realonda can answer your query.

Topic: Calculations and technical information

Video guides

Installation and Tips

Practical videos on the installation, laying and care of our ceramic products.

Can't find your answer?

For any question, check the product’s technical data sheet or the general catalogue in the downloads area. If you need advice for a specific use, write to us stating the model and where you want to install it.